Featured Ranges > Hallberg-Rassy > Hallberg-Rassy 37


Hallberg-Rassy 37

The Hallberg-Rassy 37 is a well-built long distance cruiser with great comfort. The centre cockpit is very well protected by the Hallberg-Rassy typical wind screen. There is a good aft deck, making movement on deck easy. Her interior layout allows for an airy aft cabin, well separated from the saloon, yet easily accessible. The big engine room even allows for installation of a power generator. Her tankage is generous for long range cruising. The woodwork is crafted by experienced boat builders.

Specifications

Designer:Germán Frers
CE category:A - Unlimited ocean voyages
Hull length:11.32 m / 37' 2"
Waterline at rest:10.20 m / 33' 6"
Beam:3.55 m / 11' 8"
Draft, empty load:1.90 m / 6' 3"
Displacement:7 500 kg / 16 500 lbs
Lead keel:3 200 kg / 7 100 lbs
Sail area with genoajib:77,4 m² / 833 sq ft
Mast over water, ex Windex:16.75 m / 54’11"
Headroom saloon:1.92 m / 6’ 4 ’’
Engines:From No 170: Volvo Penta D2 55 /130 S
Cylinders:3
kW / HP at crank shaft:41 / 55
Diesel tank:340 litres / 91 US gallon
Water Tank:400 litres / 107 US gallon
Stix:49

Long distance cruising with great comfort:

Hull and Deck
Hand lay-up GRP hull, with a vinylester based barrier coat. White isophtalic gelcoat. The hull is insulated above water line with Divinycell PVCfoam against heat and cold. Hand lay-up method, insu­lated above water line with Divinycell PVC-foam against heat and cold. Integrated rubbing strake with brass strip. Blue decorative band in gelcoat. Under the mast support there is a steel beam cast into the hull stiffener. Strong under floor reinforcements, bonded with composite. Lead keel with reinforcement bolted on with fifteen stainless steel bolts. The stainless steel rudder shaft is carefully mounted with two self aligning bearings for low friction in all situations. Strong engine foundations of GRP for effective sound insulation. Deck and coachroof areas and also cockpit are of sandwich con­struction, solid in parts, laminated to the hull.

Deck and deck fittings
Deck, toerail, cockpit seats, cockpit floor, side trims and bathing platform have top quality teak laid in silicon rubber. Also teak hand rails full length of superstructure. Strong stem fitting with integrated anchor roller, prepared for Original Delta anchor 44 Ibs/20 kg (this anchor is an extra). Stowage beneath for fenders and lines. Two strong cleats for­ward, aft and midships. Double stainless lifelines. Two scuppers on each side which drain rain water overboard just above waterline to prevent dirt strips on the hull. Deck inlets for water and diesel tanks are on opposite sides to avoid errors. Genoa and mainsheet tracks with blocks. Genoa block adjustable from the cockpit. Selftailing genoa winches from Lewmar, size 48 CST. Hatches to forecabin, heads, saloon and in aft cabin. Nine alu­mini­um framed port holes, eight of these are opening. A stainless steel swan neck fitting by the mast for problem free threading of existing and additional mast cables. Pulpit and pushpit have opening for easy access on board. There is a separate gas locker on port with stowage for two 6 kg P6 gas cylinders. Integrated bathing platform in transom.

Cockpit
On port side there is a generously sized, dry stowage locker. The cockpit floor is covered with a teak grating. Wheel steering with single lever engine control. Panel for engine instruments in the steering pedestal within easy reach of helmsman. Alcoves in the cockpit coaming. Strong windscreen with side handholds, opening centre section and sprayhood over front part of cockpit. The sprayhood can be rolled away neatly into a protective cover. Sliding hatch of transparent dark acrylic glass with teak handhold. On either side of this sliding hatch there are useful teak covered work surfaces, ideal as chart tables, etc. Chart tables and washboards in natural teak. Two washboards, the upper one louvered for ventilation. The washboards store in the cockpit locker. Two large cockpit drains.

Mast and rigging
Triple spreader deck stepped rig by Seldén. The spreaders are swept back only three degrees, in order to improve longships stability at the whole mast length and keeping high athwartship stability. The spreaders do not disturb the mainsail when sailing downwind. The mast is supported by a solid mahogany support and the main bulkhead. Furthermore, there is a metal beam cast into the hull stiffener area under the mast support. Main boom with outhaul and two reefs. Jib furling and reefing system Seldén Furlex. Seldén rod­kicker. Three winches; one for reefing, two selftailing for main and jib halyards. Several cleats for various uses. Spinnaker boom track and preparation for spinnaker boom topping lift are supplied as standard. Generous dimensions of standing and running rigging avoid fatigue during unrestricted ocean sailing. Turnbuckles from Hasselfors, aluminium pro­tection tubes from Seldén. Deck light. Windex wind indicator on mast top.

Sails
Mainsail and working jib made from dacron in special Offshore quality with leather reinforcements by Elvström Sails. Two reefs in main, battens and coded sail bags.

Accommodation details
All interior woodwork in light mahogany matt silk finish. Locker doors with rounded edges and ventilation above. Floor is varnished wood with inlaid holly strips. Saloon ceiling has panelling with maho­gany strips and ceilings in remainder of boat have light lining. Cushions on all berths sandwich foam, 10 cm harder and 2 cm softer on top, totally 12 cm / 5’’ thick and resting on unvarnished, well ventilated boards to avoid condensation. Handholds are in all the right positions. The boat is carpeted through­out, except directly in front of the galley, press studs avoid movement. All portholes are fitted with curtains. Curtains also under the skylights.

Saloon
The settee offers comfortable seating. On starboard side an L shaped 2.00 m / 6’ 7’’ long sofa, on port 1.80 m / 6’, with backrests with upper hinges such that the whole width of the berth can be used for sleeping accommodation. Between the settees a strong table with foldable sides. Top opening bar in the table. Headroom in saloon 1.92 m / 6’ 4’’.

ID: 3272

Hallberg-Rassy 37 Dealers:

 
International > No dealers listed.

See Hallberg-Rassy Varvs AB at http://www.hallberg-rassy.se/