Featured Ranges > XS-Ribs > XS Ribs > XS-550 XS-Ribs


XS-550 XS-Ribs

The XS-550 shares the same hull design as the XS-600 and XS-650 this gives it a generous 2.6 m beam, deep V hull, high bow and this all adds up to unrivalled sea keeping for a craft of it s size. This craft is ideally suited to cruising, diving from and sailing club rescue work at sea.

Specifications

Length Overall:5.50 m
Internal Length:4.3m
Beam:2.60 m
Internal Beam:1.6m
Draft:50 cm
Tube Diameter:50 cm
Number of chambers:5
Max Wieght of Motor:200 kgs
Payload:1100 kgs/9 Persons
Top / Cruise Speed:45/25 Kts
Hull Material:Fibreglass
Displacement in Tons:0.42
Fuel Tanks:110 Ltrs

Features / Options

XS - VALUE
Single Jockey Console, back rest and 2 x hatches
Storage for 25 L outboard tank & battery compartment.
No Feed Back mechanical steering to suit single motor with padded steering wheel
Fibreglass non slip floor
In deck bow locker with hatch, cleat and eye bolt
Tube top protection patches
D section rubbing strake to tube
External looped lifelines on tubes
5 compartment collar
Stainless steel bow eye, 2 x stainless steel transom U bolts
Rear deck well
Drain trunk

XS - DELUXE
The XS - DELUXE has all the standard equipment that the XS - VALUE comes with plus the following.
Internal 110 L fuel tank with digital gauge, sender & remote filler
Upgrade to hydraulic steering
Under deck loom
Bow open Rubber guide chanel
S/S rail to console front
4 Rubber cleat handles on tubes

COMFORT
The jockey seat and back rest are designed to make prolonged driving of the craft very comfortable. A substantial back rest and seat cushion are ergonomically designed in to the moulding of the console. The steering and controls being positioned in the optimum place for comfort of use.
This attention to detail in the comfort of the craft is applied to all our other seating and console units.

STRENGTH
As standard the craft are finished with a substantial D section fender, and tube top patches. Shown here is the optional extra flat strakes above and below the standard D Section.
A wide range of fabric upgrades, extra cladding, rubbing strakes etc are available.

SAFETY
Supplied as standard with 4 tube mounted rubber handles, external lifelines, console hand rail and substantial back rest safety is paramount in the build of the craft. Additional cladding, handles and lifelines can be added if required.

SIDE BY SIDE CONSOLE
We offer a range of side by side consoles with several options of single and double jockey seats or bench seats.
In the XS-550 care has to be taken when choosing this style of console as a heavy engine and a console further back in the boat do not work well, please seek our guidance on a side by side console option in the XS-550

UNDER DECK LOOM AND REAR WELL
A unique design of under deck loom that exits in to the rear well keeps cabling off the deck, avoids the unsightly fountain of cables coming out of the deck seen in many other craft and because of the design the hull remains sealed with no water getting in. Seen here is a gaiter to cover the exit, not standard unless you ask for it, a bilge pump, an engine bolt lock, hydraulic steering ram, drainable Racal type fuel filter, the drain trunk and draw cord to operate it.

ID: 2309

XS-550 XS-Ribs Dealers:

 
International > North America > USA > No dealers listed.

See XS-Ribs at http://www.xs-ribs.co.uk